News

The measurement of humidity at relatively higher temperatures (more than 100°C) is important in a large number of industrial applications ranging from drying process chambers to industrial-scale large baking ovens. In industrial bakery ovens for instance, humidity measurement is an important parameter to monitor as it can impact the quality and consistency of the baked goods. Subsequently,...

Amperometric zirconia oxygen sensors are widely used in industrial applications where accurate oxygen measurement is critical, such as in power plants, chemical plants, and food processing. They are also used in automotive applications to monitor the oxygen concentration in engine exhaust gases. These sensors are highly reliable, with a long operating life and minimal maintenance requirements,...

The potentiometric measuring principle for oxygen sensing covers the widest range of concentration range among all other oxygen sensing technologies – from 10-35 bar O2 and up to 100%V O2. The broad measurement range and high resolution of the sensing principle makes it interesting for many different application areas such as, additive manufacturing (AM) or Metal – 3D printing. In such application...

An affordable alternative to the TH sensors of the well-known manufacturers

The new MVH4000D-Series relative humidity and temperature sensors provide a very high accuracy of 1.5%RH and 0.2°C, while having a very fast response time. The sensors have excellent long term stability and are calibrated from the factory. A standard I2C Interface is used, which can be used to freely program many parameters such as resolution and frequency of measurements for maximum flexibility...

now with gel or parylene coatings

When it comes to pressure transmitters, there are many different products on the market. However, there are fewer differential pressure transmitters and hardly any compact differential pressure transmitters, particularly for use with liquid media. The new 85 series closes this gap.  The internal MEMS chip and ASIC can now be completely coated with gel, enabling the sensor to be used for various...

compact MEMS-based mass flow sensors

The new series from Angst+Pfister Sensors and Power is compact and thus ideal for direct integration into a product – e.g. in medical technology devices. Internally, the sensor is built on a MEMS chip that works according to the calorimetric principle. In addition to the flow, the direction of flow can also be detected. The sensor is calibrated with air as standard. On request, the calibration can...

PFLOW5001 (MFM) & PFLOWC5001 (MFC)

The new mass flow meters and mass flow controllers from Angst+Pfister Sensors and Power are based on the latest generation of MEMS sensor elements. In addition to the outstanding accuracy and repeatability, the sensor chip is passivated with silicon nitride and coated with nano materials, enabling excellent media resistance. The flow sensors and controllers are available in different versions,...

compact pressure sensors with high-resolution analog output

Until now, Fujikura has had the AL4 low-pressure series only in a two-port housing and the widely used relative pressure sensors with one port. With the new AD3 series, the higher pressures of up to 10 bar are now also available as differential pressure sensors. The small 8 x 14 mm housing can be easily integrated directly into a product and the two ports can be sealed with an O-ring. Fujikura’s...

free sample promotion

Absolute pressure is relevant in many applications, whether to determine the sea level via the air pressure or to correctly assess readings from other sensors regardless of the altitude or weather. Our PBM220 and PBM230 have been on the market for a few years and are used in a variety of applications – from medical technology to industrial applications and consumer products. In other words,...

we offer an equivalent replacement or adapt the assembly

Are you using an older pressure sensor that has been discontinued or is now very expensive? Do you have no engineering resources or would you rather use them for new developments?   We offer an equivalent replacement or our engineering team will rework the entire assembly to remain backwards compatible. The old sensor is replaced by a new, readily available sensor with the same or better...