News

We Angst + Pfister Sensors and Power are official distributor of RoboteQ (part of NIDEC group).

Due to packed inventory, we offer a special discount for the following controllers: KBL1660 (60V, 1-channel, max. 120A) – MSRP: 690 US$ - our price only 495€ MBL1660A (60V, 1-channel, max. 120A) – MSRP: 495 US$ - our price only 355€ This offer is valid till 30th June 2024 and is limited to the inventory we have.  First come, first served - our internal sales is set for your orders. If you have...

The PBM220 and the very compact PBM230 series are both piezoresistive absolute pressure sensors. Both series are available as standard from 1 to 14 bar - customized even up to 25 bar. Thanks to the special gel coating, the sensors are suitable for many applications and can be exposed to various media. For example, the sensor is used in pneumatic applications. The oil, which is present in the...

The PEWA2701 digital output pressure sensor is an OEM piezoresistive pressure sensor with a 316L stainless steel corrugated diaphragm and an insulated oil-filled construction. The sensor package uses silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensor plunger. The pressure is converted into an analog electrical signal. Customized integrated circuit for...

The 86 series is a miniaturized and robust pressure transmitter with calibrated and temperature-compensated output. It contains a MEMS or ceramic sensor element that has been specially developed for confined environments in which conventional pressure transmitters cannot be used. Offset, sensitivity, thermal errors and non-linearity are compensated at the factory by an internal DSP that executes...

The PEWA3403 pressure transmitter is a cost-effective product equipped with a pressure sensor using micro-fusion technology and a specially designed amplifier circuit. With linear correction and temperature compensation, it can effectively resist water hammer, solve the problem of instantaneous overload pressure, and also meet the various requirements of pressure measurement and control under...

The fundamental principle underlying paramagnetic oxygen gas sensor measurement revolves around the inherent paramagnetic properties of oxygen atoms, owing to their possession of two unpaired electrons. Various measurement methods exploit temperature differentials between thermistor pairs induced by a magnetic field to gauge oxygen concentrations. However, Angst+Pfister Sensors and Power's...

Excellent performance and reliability The PAROX1200 paramagnetic oxygen sensor provides an output signal virtually immune to interference from other gases. Its remarkable stability over time stands out as a key feature. This stability is achieved through a combination of heated measurement cell (55°C), carefully selected materials, and a predefined burn-in phase during application, resulting in a...

The AG2 series pressure sensors consist of a piezoresistive silicon pressure sensor chip and an integrated circuit for signal processing. The low-level signal from the sensor chip is amplified, temperature-compensated, calibrated and finally converted into an analog output voltage that is proportional to the applied pressure.

On request with up to 0.5%FS accuracyTemperature-independent measurement resultAvailable with both long and short portMiniature 10.3mm x 7mm SMT package Product details

The AP3 series pressure transducers consist of a piezoresistive silicon pressure sensor chip and an integrated circuit for signal processing.

The signal conditioning IC does not contain A/D and D/A converters in an amplifier. Therefore, the AP3 series provides a fully analog amplified and temperature compensated compensated output. In addition, the amplifier circuitry is designed for low noise. Uniquely, the AG3 series features single-point pressure threshold detection. Threshold detection. Analog output and threshold voltage Threshold...

The digital AL4 series is a dual-chip system consisting of a piezoresistive sensor chip with a very high maximum load pressure of 100 kPA and a signal-processing ASIC chip that enables digital signal processing and communication via the I2C protocol. The AL4 series of digital low pressure sensors follows the successful introduction of the A2 series of analog high precision pressure sensors and the...

At the heart of the ASIC chip is a 14-bit AD converter, which has the equivalent sensitivity of up to 0.15 Pa/LSB of a 2 kPa full-scale sensor. Six slave address codes can be assigned to the pressure sensor for individual communication with the microcontroller master. The pressure sensors are supplied in Fujikura's usual high-quality packaging, with tray or tape and reel, depending on customer...